Router Quick Start Guide
SIM installation, first login, WAN setup, local access and basic router management.
Download product datasheets or request documentation for your hardware and firmware version.
Download the PDF for your model. Check the hardware revision before using it for installation or purchasing.
CMT750 is a desktop LTE Cat. 6 router with AC733 dual-band Wi-Fi, one Fast Ethernet port and one Nano SIM slot. Power is supplied through a 12 V DC input.
CMT320 is a fixed-installation 4G router with built-in cellular and Wi-Fi antennas. Separate Fast Ethernet WAN and LAN ports are provided, with power from 12 V DC or 24 V PoE.
CMT322 combines 4G LTE, Wi-Fi and two Gigabit Ethernet ports in a compact enclosure for vehicle, branch and remote-equipment installations.
CMTX50 combines a 5G router with three LAN ports, one WAN port and two SIM slots. The rear panel provides external cellular, Wi-Fi and GPS-labelled connectors, plus a 4-pin 12–24 V DC power input. Antennas and installation accessories depend on the ordered configuration.
FWAX50 is a desktop 5G Rel. 15 CPE with AX3000 Wi-Fi 6, two Gigabit Ethernet ports and one Nano SIM slot. RJ11 voice and eSIM are order-dependent options.
GWTX10 is a five-port Gigabit gateway with four IEEE 802.3at/af PoE outputs and USB 3.0. The reference configuration supports desktop or wall mounting and management for up to 200 access points; confirm compatible AP models and firmware.
CSW108 has eight Gigabit RJ45 ports and two 1.25 Gbps SFP slots. Web and SNMP management cover the listed Layer 2 functions, including VLAN, QoS, port mirroring, static aggregation and loop detection.
CAP120 is a round indoor access point with AC1200 dual-band Wi-Fi and two Gigabit Ethernet ports. It supports up to 32 clients and accepts 802.3af PoE or 12 V DC.
CAP180 is a square indoor access point with AX1800 dual-band Wi-Fi 6 and two Gigabit Ethernet ports. It supports up to 128 clients and accepts 802.3af PoE or 12 V DC.
CAP300 is an AX3000 dual-band Wi-Fi 6 access point with two Gigabit Ethernet ports. It supports up to 128 clients and accepts 802.3at PoE or 12 V DC.
EAP120 is an IP65 outdoor access point with AC1200 dual-band Wi-Fi and two external 5 dBi omnidirectional antennas. It has two Gigabit Ethernet ports and accepts 802.3at PoE or 12 V DC.
EAP300 is an IP67 outdoor access point with AX3000 dual-band Wi-Fi 6 and four built-in directional antennas. Network and power use one Gigabit PoE uplink; a separate console port is included.
EAP301 is an IP65 outdoor access point with AX3000 dual-band Wi-Fi 6 and four external waterproof 5 dBi antennas. It has two Gigabit Ethernet ports and accepts 802.3af PoE or 12 V DC.
For installation instructions or firmware information, include the model, hardware revision and software version in your request.
SIM installation, first login, WAN setup, local access and basic router management.
CPE position, carrier information, signal checks and Ethernet or Wi-Fi handoff at the premises.
Local switching, PoE distribution and the connection between gateways and indoor or outdoor access points.
Country, interfaces, power method, mounting format and requested delivery date.
Include the model, hardware revision, software version, document type and required language.