FWAX50
Desktop 5G FWA CPE with AX3000 Wi-Fi 6, two Gigabit ports and Nano SIM.
For home, SMB and branch broadband. RJ11 voice, eSIM and external antenna connections are configuration-dependent options.
Connections and installation
Share fixed-site 5G broadband over Ethernet or Wi-Fi, with a configurable WAN/LAN port for the local network.
Typical applications
- Fixed wireless broadband
- Home and SMB broadband
- Branch internet handoff
Ports, power and mounting
- 2 x Gigabit RJ45; 1 x WAN/LAN configurable
- 1 x Nano SIM; eSIM optional for ISP configurations
- 12 V DC / 1.5 A
- Optional 1 x RJ11 (VoNR / VoLTE)
Broadband access and network control
Local connectivity, backup uplinks and remote administration.
Ethernet and Wi-Fi 6
Connect local devices through two Gigabit Ethernet ports or AX3000 Wi-Fi 6. Wired and wireless devices can share the same cellular connection.
Cellular antenna options
The reference configuration uses six internal cellular antennas. Customized versions offer two SMA connections; confirm the antenna configuration when ordering.
Optional voice and eSIM
RJ11 voice and eSIM are available on selected configurations. Specify these options when requesting a quotation.
Multi-WAN and failover
Use wired WAN and cellular links for load balancing or backup. Configure the link priorities and failover policy for the installation.
Band and PCI control
Select cellular bands or lock a PCI. Configure APN, IP passthrough and DNS to match the operator and local network.
Remote management and VPN
Administer devices through the web interface or remote management, and install firmware updates over the air. VPN and firewall settings control access to the local network.
Technical specifications
Specifications vary by hardware version and regional configuration.
Cellular and wireless
- Cellular standard
- 5G 3GPP Release 15; NSA and SA operation
- Peak cellular rate
- Up to 2.6 Gbps downlink in NSA; up to 2.0 Gbps in SA
- Peak cellular uplink
- Up to 650 Mbps in NSA; up to 1.0 Gbps in SA
- LTE fallback
- LTE Cat. 12 downlink / Cat. 13 uplink
- Cellular features
- 100 MHz bandwidth; 5G + 4G dual connectivity; downlink 4 x 4 MIMO
- Regional bands
- 5G and LTE band set varies by regional version
- SIM
- 1 x Nano SIM; eSIM optional for ISP configurations
- Cellular antennas
- 6 x internal antennas; 2 x SMA connectors on customized versions
- Wi-Fi standard
- Dual-band Wi-Fi 6
- Wi-Fi speed
- Up to 574 Mbps at 2.4 GHz; up to 2402 Mbps at 5 GHz
- Wi-Fi capacity
- Up to 256 clients; 100 recommended
- Wi-Fi security
- WPA, WPA2 and WPA3
Interfaces and connections
- Ethernet
- 2 x Gigabit RJ45; 1 x WAN/LAN configurable
- Voice
- Optional 1 x RJ11 (VoNR / VoLTE)
Hardware and functions
- Processor
- 1.3 GHz dual-core Arm Cortex-A53
- Memory
- 128 MB NAND flash; 512 MB DDR3L RAM
Power and installation
- Power input
- 12 V DC / 1.5 A
- Max power consumption
- 13.2 W
- Installation
- Desktop
Software and network management
- WAN management
- Multi-WAN load balancing; wired-WAN / cellular failover
- Cellular control
- Band selection and PCI lock; automatic / manual APN and TTL settings
- IP passthrough
- Supported
- VPN functions
- VPN server / client and passthrough; OpenVPN, WireGuard, IPsec, L2TP and PPTP
- Network controls
- QoS; configurable DNS; UPnP; DMZ; IP / MAC filtering; port forwarding
- Wi-Fi isolation
- Client isolation
- Device management
- Web interface; remote management; firmware over-the-air updates
- Application extensions
- Supported; available packages depend on the supplied firmware
Environment and enclosure
- Dimensions
- 116 mm diameter x 202 mm high
- Operating temperature
- 0 °C to 40 °C
- Storage temperature
- -40 °C to 70 °C
- Operating humidity
- 10% to 90%, non-condensing
- Storage humidity
- 5% to 90%, non-condensing
- Certifications
- FCC, CE
Downloads
Choosing your configuration
Regional bands, antenna version, RJ11 voice and eSIM depend on the selected configuration.
Request model information